Setting The Clock; Programming On/Off Features - Keurig B60 Owner's Manual

SECTION 2

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in
the LCD Control Center.
NOTE: You must set the clock if you will be using the
On/Off Time programming feature.
1. Press the Menu Button.
9
fig.
The word "OFF" will appear at the bottom
2.
of the LCD Control Center to indicate that
the clock is not set. The programming options
SET CLOCK
will appear on the LCD Control Center with a
AUTO OFF
ON OFF TIME
BREW TEMP
small arrow pointing to "SET CLOCK" (fig. 9).
MENU "H" (Hour) and "M" (Minute) will appear and
Menu
blink.
Press or hold the blue Small Cup Button
3.
under the blinking "H" until you have reached
the appropriate hour. If the hour has passed
12, the indicator switches from "AM" to "PM".
Set Set
Hours Minutes
Press or hold the blue Large Mug Button
4.
under the blinking "M" to set the minutes.
When you have reached the correct time, press the Menu Button five
5.
times to scroll through the remaining programming options and exit
the programming mode.
The correct time should now be displayed in the LCD Control Center.
6.
NOTE: If power is interrupted to the Brewer by unplugging it, or if power
is lost, follow the procedure above to reset the time as the clock will not be
visible until the time is set.
Controls & Indicators (LCD Control Center)

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule. By programming your Brewer to turn on
each morning, you will never have to wait for the Brewer to warm up to brew
a gourmet cup of coffee.
The Brewer can be left on all the time so that it is
1. Leave it ON all the time.
always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To
turn the Brewer off at any time, simply press the Power Button.
Although the clock remains on if set, you can not brew a cup of coffee, tea or
Press the Power Button again to restore power to the Brewer.
hot cocoa.)
You will have to wait for the water to heat up before the Brewer is ready to
brew.
2. Set the Brewer to Auto Off following a
10
fig.
a. Press the Menu Button twice to program the
SET CLOCK
AUTO OFF
ON OFF TIME
BREW TEMP b. Press or hold the blue Small Cup Button
MENU
Menu
x2
10
specified period of time after the last brew.
Auto Off feature. The LCD Control Center will
now display the programming options with a
small arrow next to "SET AUTO OFF" (fig. 10).
under the blinking "H" to advance 1 hour at
a time, up to 9 hours.
(NOTE :