Section 4 Setting The Time And Temperature; Adding Water; Accessing The Settings Menu; Setting The Clock - Keurig Vue V1200 Use & Care Manual

SECTION 3
Using Your Brewer

Adding Water

When the water supply is low, the Touchscreen will display as
Coffee Coffee Brew
Café
& Tea & Tea Over Ice Not Frothing
Not pictured and the light inside the Water Reservoir will flash.
Ready to Enjoy!
2 Step
Brew
H M
OZ
PM
Bottled or filtered water is recommended.
Tea Tea
Menu
Froth
Coffee Coffee
Other Other
Size
Step2 Step2 Step1
Add Water
Regular When brewing at sizes larger than 12 oz., if the Brewer senses the
Hot Hot
Café
Cocoa Cocoa
Strong
water level is low, the brewing process will stop until the Water
Reservoir is refilled. Once enough water has been added, the
brewing process will resume.
Do not remove the Water Reservoir during the brewing process.
There are three options for filling the Water Reservoir:
Option 1
Remove the Water Reservoir Lid and pour water directly
into the Water Reservoir. Replace the Lid.
Option 2
Instead of removing the Water Reservoir Lid, you can
lift the Flip Top. Pour water into the Water Reservoir.
Lower the Flip Top.
Option 3
You may also remove the Water Reservoir from
the Brewer to fill it. Replace the Lid and return
the filled Water Reservoir to the Brewer.
Do not remove the Water Reservoir during the brewing process.
If the Brewer senses the water level is low when brewing 14 oz.,
Coffee Coffee Brew
Café
& Tea & Tea Over Ice Not Not Frothing
Ready to Enjoy!
2 Step
Brewing 16 oz. or 18 oz. sizes, the brewing process will stop until the Water
H M
OZ
PM
Tea Tea
Menu
Coffee Coffee Froth Reservoir is refilled. Once enough water has been added, the
Other Other
Size
Step2 Step2 Step1
Add Water
Regular
Hot Hot
Café
brewing process will resume. Ensure that your mug is still
Cocoa Cocoa
Strong
on the Drip Tray.
16
Setting the Time and Temperature

Accessing the Settings Menu

The menu screen appears when the brewer is first turned on,
the handle is raised, or when a brew has been completed.
Follow the steps below to access the settings menu. Press and
hold the "Menu" button to access. Use "Menu" button to tab
through the setting options.

Setting the Clock

Step 1
Select the "Menu" icon on the Touchscreen.
Step 2
The "H" will flash, indicating you are programming the
hours. The clock is on a 12h setting and will switch to PM
once the 12h mark is passed. Use the + and – buttons to
change the hours. Press the menu button again to set the
minutes. Use the + and – buttons to set the minutes.
Once the clock is set, press the "Menu" button to save your
settings. The screen will move to the next programmable
setting (Auto Off).
Programming the "Auto Off"
Feature
You can program the Brewer to automatically turn off after
a certain period of time after the last brew. This feature can
be used as an energy saver.
In "Auto Off" programming mode, use the + and - buttons
to change the hours the Brewer will remain on after the last
brew. For example, if you select "2," the Brewer will turn off
two hours after the last brew. Use the + and - buttons to
scroll to "Off" to deactivate the "Auto Off" feature.
Once the feature is set, press the "Menu" button to save your
settings. The screen will move to the next programmable
setting (Set On Time see page 18).
SECTION 4
Coffee Coffee Brew
Café
& Tea & Tea Over Ice Not Not Frothing
Ready to Enjoy!
2 Step
Brew
H M
OZ
PM
Tea Tea
Menu
Froth
Coffee Coffee
Other Other
Size
Step2 Step2 Step1
Regular
Hot Hot
Café
Cocoa Cocoa
Coffee Brew
Café
& Tea Over Ice Frothing
Enjoy!
2 Step
Brew
H M
OZ
PM
Tea Tea
Menu
Froth
Coffee Coffee
Other Other
Size
Step2 Step2 Step1
Regular
Hot Hot Set Clock
Café
Cocoa Cocoa
Coffee Brew
Café
& Tea Over Ice
2 Step
H
Menu
Set Auto Off
17