Ip Address Of The Wireless Range Extender - Hawking Hi-Gain HD45X User Manual

Dual-band wireless-n extender
Hide thumbs Also See for Hi-Gain HD45X:
Table of Contents

Advertisement

3-2-2 IP Address of the Wireless Range extender

You can change the IP address of this wireless range extender so it can
become a part of your local network. Please remember this address or you
will not be able to connect to the configuration menu of this wireless range
extender.
Default IP address: 192.168.1.240 / Subnet Mask: 255.255.255.0.
You can press and hold 'Reset' button 15 seconds, then power off/on to
change the IP address back to default value if you forget the IP address you
set.
To change IP address, please click 'System Utility' sub-tab, and the
following message will be displayed:
Please input IP address and Subnet Mask in corresponding field, and you can
input the IP address of gateway in the 'Gateway Address' field, if you need
to manage this wireless range extender from another network (like the
Internet).
If you want to activate the DHCP server function of this wireless range
extender, select 'Enabled' in 'DHCP Server' option. Please go to section
3-2-3 for DHCP settings. If you don't want to use DHCP server function of
this wireless range extender, or there's another DHCP server on the network,
please select 'Disable'.
The default mode for the DHCP server is
'Disable'.
44

Advertisement

Table of Contents
loading

Table of Contents