Set Ip Address - Hawking HWUR54G Quick Installation Manual

4)

SET IP ADDRESS:

To successfully communicate to the HWUR54G, an IP
Address must be assigned to the unit. If you are on a network with a router that
distributes IP Address automatically (DHCP) you have the option to automatically
configure the IP Address. However the Extender must be connected to your network
and not directly to the PC for this to work.
You may also manually assign your IP Address (Recommended).
Note: The IP Address of the device must be in the same context/subnet of the PC it is
connected to in order to complete the setup of the device. The listed IP Address in
the Setup Wizard is the recommended IP based on the IP Address on your PC. You
may change the last number of the IP Address but it is highly recommended that you
DO NOT adjust the other numbers.
When you have selected your IP Address click "Next" to continue the setup.
6