Hawking Hi-Gain HD45X User Manual page 60

You should see your device listed under Mac Address. Each HD45X on the
network will have a unique Mac Address. This number should correspond
to the numbers/letters listed on the bottom of your device. Please select the
unit that you wish to configure. Next to the Mac Address, there will be an
IP address that is assigned to that particular HD45X. Highlight the unit and
click 'Connect'. A web browser will open and take you into the setup page
of the device. (Refer to earlier sections on this manual.)
If the device does not appear, you may have to reset the unit. Press and
hold the reset button for 15 seconds, power off/on. Then reconnect and
start from section 2-1.
53