Hawking Hi-Gain HD45X User Manual page 45

This page contains two parts of MAC filtering information. All allowed
MAC addresses will be listed in upper part, and you can add new MAC
addresses by components in lower part.
Enable Wireless
Access Control
MAC address
Comment
Add
Reset
Select
Delete Selected
Delete All
Reset
After you finish with setting, click 'Apply', and the following message will
be displayed:
Check this box to enable MAC address restriction.
If unchecked, no restriction will be enforced (any
wireless client with proper encryption setting will
be able to connect to this wireless range extender).
Input MAC address allowed using this wireless
range extender here. You don't have to add colon
(:) or hyphen (-) by yourself, just input 0 to 9 and a
to f here, like 112233445566 or aabbccddeeff.
You can input any text here as the comment of this
MAC address, like 'ROOM 2A Computer' or
anything. You can input up to 16 alphanumerical
characters here. This is optional and you can leave
it blank. However, it's recommended to use this
field to write a comment for every MAC address as
a memory aid.
When you finish inputting MAC address and
(optional) Comment, click this button to add the
MAC address to the list.
Remove all characters in 'MAC address' and
'Comments' field.
Check this box to select one or more MAC
addresses to delete.
Click this button to delete all selected MAC
addresses.
Delete all MAC address entries.
Uncheck all selected MAC address entries.
38