Chapter 3. Wireless Lan Access Point Connection - Hawking HWBA54G User Manual

ŒAccess Point
•Connector Cable Reverse SMA to Reverse SMA
ŽSignal Booster
•Antenna
•Power Adapter of the Signal Boostr
Wireless LAN Access Point Connection
1. Locate an optimum location for the Wireless LAN Access Point.
The best location for your Access Point is usually at the center of your
wireless network, with line of sight to all of your mobile stations.
2. Connect the Wireless LAN Access Point to your router, hub or switch.
Connect one end of standard UTP cable to the Access Point's LAN Port and
connect the other end of the cable to a switch, a router or a hub. The Access
Point will then be connected to your existed wired LAN Network.
3. Connect the DC Power Adapter to the Wireless LAN Access Point's
Power Socket.
Only use the power adapter supplied with the Access Point. Using a different
adapter may damage the product.
The Hardware Installation is completely also you can start to enjoy the
wireless network environment.
4 5