Hawking Hi-Gain HD45X User Manual page 43

Config Mode
Start PBC
Start PIN
NOTE: When you're using PBC type WPS setup, you must press
'PBC' button (hardware or software) of wireless client within 120
seconds; if you didn't press PBC button of wireless client within
this time period, please press 'PBC' button (hardware or software)
of this extender again.
displayed here. If you don't enable security
function of the range extender before WPS is
activated, the extender will auto set the security to
WPA (AES) and generate a set of passphrase keys
for WPS connection.
Passphrase Key: Displays the WPA passphrase
here, all characters will be replaced by asterisk for
security reasons. If encryption is not set on this
extender, nothing will be displayed here.
There are 'Registrar' and 'Enrollee' modes for the
WPS connection. When 'Registrar' is enabled, the
wireless clients will follow the extender's wireless
settings for WPS connection. When 'Enrolle' mode
is enabled, the extender will follow the wireless
settings of wireless client for WPS connection.
Click 'Start PBC' to start Push-Button style WPS
setup procedure. This range extender will wait for
WPS requests from wireless clients for 2 minutes.
The 'WLAN' LED on the range extender will be
steady on for 2 minutes when this extender is
waiting for incoming WPS request.
Please input the PIN code of the wireless client
you via client wish to connect, and click 'Start PIN'
button. The 'WLAN' LED on the extender will be
steady on when this extender is waiting for
incoming WPS request.
36