Sleep Timer Function - Denon AVR-1713 Owner's Manual

NOTE
• When "HDMI Control" is set to "On", it consumes more standby
power.
• The HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
• Some functions may not operate depending on the connected TV
or player. Check the owner's manual of each device for details
beforehand.
• When "P.Off Control" on the menu is set to "Off"
this unit is not set to standby even if the connected device is in the
standby mode.
• When connection changes are implemented, such as adding
connections to HDMI devices, linked operations may be initialized.
In this case, you will need to reconfigure the settings.
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat steps 2 and 3.
• There is a change to the connection between the devices and the
HDMI, or an increase in devices.
DVD
HDMI control function

Sleep timer function

You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for viewing and listening while
going to sleep.
SLEEP
Press and display the time you
want to set.
The indicator on the display lights.
• The time switches as shown below each
SLEEP
time is pressed.
(vpage 90),
Off
120 110
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press .
"Sleep : zmin" appears on the display.
z Countdown time
To cancel the sleep timer
SLEEP
Press to set "Off".
The indicator on the display turns off.
The sleep timer setting is canceled if this unit's power is set to
standby.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn of the power of those connected
devices, set up sleep timers on the connected devices themselves.
10 min 20 30 40 50
100 90 80 70 60
74