Playing A Blu-Ray Disc Player/Dvd Player; Adjusting The Master Volume; Turning Off The Sound Temporarily - Denon AVR-1713 Owner's Manual

Adjusting the master volume

VOLUME df
Use to adjust the
volume.
• The volume display method varies
depending on the "Scale" setting
(vpage 86).
n When the "Scale" setting
(vpage 86) is "0 – 98"
GAdjustable rangeH 0.0 0.5 – 98.0
n When the "Scale" setting (vpage 86) is "–79.5dB –
18.0dB"
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning
on the main unit.

Turning off the sound temporarily

Press MUTE : .
• "MUTE" indicator on the display flashes.
:
• appears on a TV screen.
• The sound is reduced to the level set at "Mute Level" (vpage 86).
MUTE :
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
DVD
Important information
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
POWER X
Press
to the unit.
3
Press Blu-ray
player used for playback.
4
Play the Blu-ray Disc player or DVD player.
• Make the necessary settings on the player (language setting,
MASTER VOLUME
subtitles setting, etc.) beforehand.
to turn on power
or DVD to switch an input source for a
28