How To Make Detailed Settings; Menu Map - Denon AVR-1713 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Surr.Parameter
Tone
Dialogue Level
Audio
Subwoofer Level
Restorer
Audio Delay
Volume
Audyssey
Manual EQ
HDMI Setup
Volume Display
Info.Display
Video
Audio Display
TV Format
Digital Assign
Source Rename
Hide Source
Inputs
Source Level
Input Select
Video Source
DVD
Description
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Sets the output level to clarify the dialogue
output from the center channel.
Sets the subwoofer on/off and its output level.
Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
Compensates for incorrect timing between video
and audio.
Set the volume setting.
Makes Audyssey MultEQ ® XT, Audyssey
Dynamic EQ ® and Audyssey Dynamic Volume ®
settings.
Uses the graphic equalizer to adjust the tone of
each speaker.
Makes settings for HDMI video/audio output.
Sets where to display the master volume level.
Displays status of operation temporarily when
the sound mode is changed or input source is
switched. You can set whether or not to show
each of these status displays.
Sets how long each menu is displayed when the
input source is "NETWORK", "iPod/USB", or
"FM".
Set the video signal format to be output for the
TV you are using.
Changes input connector assignment.
Changes the display name for this source.
Remove from the display input sources that are
not used.
Adjusts the playback level of the audio input.
Sets the audio input mode and decode mode.
Video of another input source is played back
combined with the playing audio.
Page Setting items Detailed items
Audyssey ® Setup
84
85
85
Manual Setup
Speakers
86
86
Information
IP Control
Friendly Name
86
Network
86
Settings
87
Language
Quick Sel.Names
88
General
Auto Standby
90
90
91
Front Display
91
Information
Firmware
91
93
Setup Lock
94
Perform the installation, connection, and setup procedures to prepare the
94
unit for operation following guidance.
94
Setup
94
Assistant
95
79
Description
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Perform when setting the speakers manually
or when changing settings made in Audyssey ®
Setup.
Display network information.
Set the network function on/off during standby.
The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
Make settings for wired LAN.
Sets the language for display the menu on the
TV screen.
Change the "Quick Select" display title to one
you prefer.
When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, "Auto
Standby" is displayed on the display of this unit
and the menu screen.
Adjust the display brightness of this unit.
Show information about receiver settings, input
signals, etc.
Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications.
Protect settings from inadvertent change.
Page
20
97
101
101
101
102
105
105
105
105
106
107
108
C 7