Playback (Basic Operation); Important Information; Selecting The Input Source; Turning The Power On - Denon AVR-1713 Owner's Manual

Playback (Basic operation)

Setup (vpage 20)
n Turning the power on (vpage 27)
n Selecting the input source (vpage 27)
n Adjusting the master volume (vpage 28)
n Turning off the sound temporarily (vpage 28)
n Playing a Blu-ray Disc player/DVD player
(vpage 28)
n Playing an iPod (vpage 29)
n Playing a USB memory device (vpage 32)
n Listening to FM broadcasts (vpage 35)
n Listening to internet radio (vpage 43)
n Playing back files stored on a PC and NAS
(vpage 46)
n Using online services (vpage 50)
n Convenient functions (vpage 58)
n AirPlay function (vpage 62)
Selecting a listening mode (Sound Mode)
(vpage 64)
Playback (Advanced operation) (vpage 73)
DVD

Important information

Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.

Turning the power on

Press POWER X to turn on power to
the unit.
The power indicator lights green and the
power turns on.
You can also switch the power to standby by pressing
unit.
n When power is switched to standby
POWER X
Press .
GPower indicator status in standby modeH
• Normal standby : Off
• When "HDMI Control" (vpage 90) is set to "On" : Red
• When "IP Control" (vpage 101) is set to "Always On" : Red
27

Selecting the input source

Press the input source select button
( CBL/SAT , DVD , Blu-ray
AUX MEDIA PLAYER
,
AUDIO , FM , NETWORK
RADIO
) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the button on the main unit
SOURCE SELECT 0 1
Use
SOURCE SELECT 0 1
• Using
shown below.
CBL/SAT DVD
X
TV AUDIO NETWORK
on the main
, GAME ,
iPod/USB TV
, ,
or INTERNET
.
switches the input source, as
Blu-ray GAME AUX
FM iPod/USB MEDIA PLAYER