Source Rename; Source Level; Input Select - Denon AVR-1713 Owner's Manual

Source Rename

Change the display name of the selected input source.
This is convenient when the input source name of your device and the input source name of this unit are
different. You can change the name to suit your needs. When the renaming is completed, the name is
displayed on this unit's display and on the menu screen.
CBL/SAT / DVD / Blu-ray / GAME / MEDIA PLAYER / AUX / TV AUDIO : Change the display name of
the selected input source.
• Up to 12 characters can be input.
• For character input, see page 82.
Set Defaults : The input source name is returned to the default setting.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
ENTER
If you select "Set Defaults" and press
default values?" is displayed. Select "Yes" or "No", and then press
Hide Source
Remove from the display input sources that are not used.
CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / iPod/USB / FM / NETWORK / TV AUDIO
: Select input source that is not used.
• Show : Use this source.
• Hide : Do not use this source.
NOTE
Input sources set to "Hide" cannot be selected using the input source select button.
DVD
Setting details
, the message "Reset to the
ENTER
.
Default settings are underlined.
Setting details

Source Level

• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "DIGITAL" is assigned at "Digital Assign" (vpage 93).

Input Select

Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• "Digital" can be set for input sources for which "DIGITAL" is assigned
to "Auto".
at "Digital Assign" (vpage 93).
• If the input source is set to "CBL/SAT" or "DVD", it can be set to
"Analog".
• When digital signals are properly input, the
the display. If the
(vpage 93) and the connections.
• If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
94
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check "Digital Assign"
v See overleaf
Inputs