Hdmi Setup - Denon AVR-1713 Owner's Manual

HDMI Setup

Make settings for HDMI video/audio output.
Setting items
On : Compensated.
Auto Lip Sync
Make automatic Off : Not compensated.
compensation for timing
shift in audio and video
output.
AVR : Play back through speakers connected to the unit.
HDMI Audio Out
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting
On : Use HDMI control function.
HDMI Control
You can link operations with Off : Do not use HDMI control function.
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "Off".
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to "HDMI control function"
about the HDMI control function.
NOTE
• When "HDMI Control" is set to "On", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
DVD
Default settings are underlined.
Setting details
(vpage 73 "HDMI control function").
(vpage 73) for more information
Setting items
Standby Source Last : Enters standby with the previously used input source.
Sets the HDMI input source CBL/SAT / DVD / Blu-ray / GAME / MEDIA PLAYER / AUX : Enters
to put into standby when standby with each of the input sources assigned to each input terminal.
the power is on.
"Standby Source" can be set when "HDMI Control" is set to "On".
P.Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby of source, power to this unit is automatically set to standby.
this unit to external devices. Video : If power to a connected TV is turned off when the input source is
CBL/SAT, DVD, Blu-ray, GAME, MEDIA PLAYER, AUX power to this unit
is automatically set to standby.
Off : This unit does not link with power to a TV.
"P.Off Control" can be set when "HDMI Control" is set to "On".
Volume Display
Sets where to display the master volume level.
Setting items
Volume Bottom : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
90
Video
Setting details
Default settings are underlined.
Setting details