Denon AVR-1713 Owner's Manual page 100

Manual Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup.
• If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select
Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® (vpage 87).
• "Manual Setup" can be used without changing the settings. Please set if necessary.
Setting items
Speaker Config. Front : Set the front speaker size.
Indicate speaker presence • Large : Use a large speaker that can adequately play back low
and select speaker size frequencies.
categories based on bass • Small : Use a small speaker that has inadequate playback capacity for
reproduction capability. low frequencies.
NOTE
• When "Subwoofer" is set to "No", "Front" is automatically set to
Do not use the outward
"Large".
shape of the speaker to
• When "Front" is set to "Small", "Center" and "Surround" can not be
determine selection of a
set to "Large".
"Large" or "Small" speaker.
Center : Set the presence and size of the center speaker.
Instead, use the frequencies
• Large : Use a large speaker that can adequately play back low
set in "Crossovers"
frequencies.
(vpage 99) as the
• Small : Use a small speaker that has inadequate playback capacity for
standard for determining
low frequencies.
bass reproduction capability.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
DVD
Default settings are underlined.
Setting details
Setting items
Bass Subwoofer Mode : Select low range signals to be reproduced by
Set subwoofer and LFE subwoofer.
signal range playback. • LFE : The low range signal of the channel set to "Small" speaker size is
added to the LFE signal output from the subwoofer.
• LFE+Main : The low range signal of all channels is added to the LFE
signal output from the subwoofer.
• "Subwoofer Mode" can be set when "Speaker Config." – "Subwoofer"
(vpage 97) is set to "Yes".
• Play music or a movie source and select the mode offering the strongest
bass.
• Select "LFE+Main" if you want the bass signals to always be produced
from the subwoofer.
NOTE
If "Front" and "Center" for "Speaker Config." are set to "Large", and
"Subwoofer Mode" is set to "LFE", no sound may be output from the
subwoofers, depending on the input signal or selected sound mode.
LPF for LFE : Set LFE signal playback range. Set this when you want to
change the playback frequency of the subwoofer.
• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
97
Speakers
Setting details
v See overleaf