HP XM600 - Kayak - 128 MB RAM Technical Reference Manual page 126

For More Information
About MaxiLife
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages
Components are tested in sequence when the "Next" button is pressed.
When they have all been checked, a diagnostic screen is shown. Depending
on the result of the diagnostics, the screen could indicate either:
Diagnostics Done OK or FAIL.
At the end of the test, you can exit the diagnostic mode by pressing the
LCD button.
Refer to the online Troubleshooting Guide for more information about this
diagnostics utility at the HP World Wide Web site:
http://www.hp.com/go/kayaksupport
126
.