Using The Hp Setup Program - HP XM600 - Kayak - 128 MB RAM Technical Reference Manual

5 HP BIOS

Using the HP Setup Program

To run the Setup program, press
immediately after restarting the PC Workstation.
Alternatively, press
default, this remains on the screen for 15 seconds, but pressing any key will
ignore this delay. It is not possible to hold the summary configuration screen
indefinitely on the screen.
The band along the top of the Setup screen offers the following menus:
Main, Advanced, Security, Boot, Power and Exit. These are selected using
the left and right arrow keys.
The following screens are examples of a BIOS configuration.
Main Screen
The Main Screen presents a list of fields. To change a value press either the
or keys.
Main Advanced
BIOS Version:
PnP OS
Reset Configuration Data:
System Time:
System Date:
Key Click:
Keyboard auto-repeat rate speed:
Delay before auto-repeat:
Numlock at Power-on:
F1 Help




   
ESC Exit
       
104
while the initial HP logo is displayed,
to view the summary configuration screen. By
PhoenixBIOS Setup Utility
Security Boot
IC.11.02
[No]
[No]
[14:42:33]
[02/08/2000]
[Disabled]
[21.8 per Second]
[0.50 Second]
[On]
Select Item F7/F8
Select Menu Enter Select > Sub-Menu
Power Exit
Item-Specific Help
.
Change Values F9
F10
Setup Defaults
Previous Values