4.3 Scan Settings
4.3.1
Original Width
To specify the original width, press the L1 Key in Scan Mode Screen to enter Original Size
Screen.
Specify a proper original size with pressing the L1 Key repeatedly.
The scanner reads an original in a given original width.
"Auto" enables the scanner to detect the original width properly.
"Auto" disables Original Orientation.
The following original width settings are provided.
DIN:
DIN Extra:
ENG:
ARCH:
Press the Enter Key to apply the setting.
Auto, A3, A2, A1, A0, 36"
Auto, A3, A2, A1, 880, 36"
Auto, 11", 17", 22", 34", 36"
Auto, 12", 18", 24", 30", 36"
39