Test Mode - Kyocera KM-4800w Operation Manual

Copy/scan operation manual

Hide thumbs Also See for KM-4800w:

Table of Contents

5.2.4

Test Mode

To inspect the printing/scanning unit, press the R2 Key in Menu Mode Screen to enter Test

Mode Screen.

Test Mode Screen requires a password entry.

5.2.4.1 Test Print

Two patterns for the test print are provided.

The test patterns show whether the printing unit works correctly.

Press the L1 Key repeatedly in Test Mode Screen for a pattern number and press the Start

Key to print the test pattern.

5.2.4.2 Shading

Reading Sensors on the scanner can be calibrated correctly with "Shading".

Press the R1 Key in Test Mode Screen to highlight "Execute", and then press the Start Key to

start.

The following message is displayed.

Set the Calibration Sheet to the scanner, and then press the Enter Key to start.

Table of Contents