Index REGARDING THIS MANUAL ............2 INSTALLATION METHOD FOR WINDOWS 2000/XP....... 3 2.1. Extract the compressed HDI Driver file ................3 2.2. Add HDI Plotter ......................... 3 INSTALLATION METHOD FOR WINDOWS VISTA ......10 3.1. Extract the compressed HDI Driver file ................10 3.2.
Installation Method for Windows 2000/XP 2.1. Extract the compressed HDI Driver file Execute "HDIxx_KM4800w_V100E.EXE”, which is included in the following shown directory of the disk, \Software\HDI_Driver\EN\HDIxx_For_200x\. English: select \Software\HDI_Driver\EN\ French: select \Software\HDI_Driver\FR\ German: select \Software\HDI_Driver\DE\ Italian: select \Software\HDI_Driver\IT\ Spanish: select \Software\HDI_Driver\ES\ Select a ”HDIxx_For_200x”...
Page 7
Specify [km2wide_e8.hif], and then click [Open]. Select model name (KM-4800w) of [Kyocera], and click [Next].
Page 8
Click [Next]. Check “KM-4800wEN Network Port”, and click [Next]. “KM-4800wEN Network Port” will not appear if the printer driver is not installed. Install the printer driver first in this case.
Page 9
Enter any Plotter Name, and click [Next]. (For sufficient operation, you can add “HDI-" to the printer name) Click [Finish]. Setup is completed.
Page 10
Added Plotter appears. To update the HDI Driver, start the Auto Desk Plotter Manager under the Control Panel, uninstall the HDI Driver, and install the update version of HDI Driver.
HDI printer driver. Without doing so the general user cannot add KM-4800w as a HDI plotter. If a general user attempts to add KM-4800w on [Run as administrator], a plotter “KM- 4800w” will be added to the administrator, not to the user.
Page 12
A window appears and asks the installation destination. Change C: drive from D: drive, and click [OK]. HDI Driver is not installed correctly if the Install Directory is CD-ROM Drive. Program Compatibility Assistant appears. Click [This program installed correctly].
3.2. Add HDI Plotter Launch AutoCAD 2008. Select [Plotter Manager…] from [File] of Menu bar.
Page 14
Select [Add-A-Plotter Wizard]. Right-click on it and select [Run as administrator]. NOTE: For a general user, select [Open], not [Run as administrator]. [A program needs your permission to continue] may pop after selecting [Run as administrator]. Click [Continue]. NOTE: The pop-up will not appear when a general user opens Add-A-Plotter Wizard. Click [Next].
Page 15
Select [My Computer], and click [Next]. Click [Have Disk]. NOTE: A general user does not need to click [Have Disk] as the driver will have been installed by an administrative user. Specify “Kyocera” in Manufacturers list and select “KM-4800w” in Models list.
Page 16
Specify [km2wide_e32_9.hif], and then click [Open]. Select model name (KM-4800w) of [Kyocera], and click [Next].
Page 17
Click [Next]. Check “KM-4800wEN Network Port”, and click [Next]. “KM-4800wEN Network Port” will not appear if the printer driver is not installed. Install the printer driver first in this case.
Page 18
Enter any Plotter Name, and click [Next]. (For sufficient operation, you can add “HDI-" to the printer name) Click [Finish]. Setup is completed.
Page 19
Added Plotter appears. To update the HDI Driver, start the Auto Desk Plotter Manager under the Control Panel, uninstall the HDI Driver, and install the update version of HDI Driver.
4.2. Custom Output Setting Click [Properties] of [Printer/Plotter] list.
Page 24
Select [Custom Properties] of [Device and Document Settings], and then click [Custom Properties] of [Access to Custom Dialogue]. <Output Setting> If [Option Setting] is not required, select [Standard] under [Output]. In order to set [Option Setting], click [Option].
Page 25
• Option Setting <Paper media selection> Plain Vellum Film <Tray selection> Auto Deck 1 Deck 2 Bypass <Paper cut mode> Standard cut Cut with standard size. Synchronous cut Cut with the length of output data. <Image Centering> <Mirror Image>...
Page 26
<Pen Setting> Select Gray Value and Pen width of Pen 1 - 255. <Negative Image> <Image Density> 1 - 9...
Page 27
AutoCAD HDI Driver User’s Manual 2008. 7 Rev. 1.0 The Copyright Act protects this manual. It is prohibited to copy or duplicate all or a part of this manual without permission.