Overview Of The Applications - Kyocera FS-C5150DN Operation Manual

Op functions
ID
_
Password
_
Optional Functions
You can use the optional applications installed on this machine.

Overview of the Applications

The applications listed below are installed on this machine.
• UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print
driver.
Note Restrictions such as the number of times the application
can be used during the trial period differ depending on the
application.
1
Press [MENU].
2
Press or
>
ID (Administrator ID input)
To use the Optional functions, you must enter an administrator ID. For
information on how to set the administrator ID, refer to Administrator
(Administrator settings) on page 4-76.
1
Press while Op functions > is displayed.
2
The message display shows ID and a blinking cursor (_).
3
Press or
blinking cursor. Enter the specified ID. Use
cursor right and left. Enter an ID consisting of between 1 and 16
numbers.
4
Press [OK]. Proceed to the next step Password (Administrator
Password input).
Password (Administrator Password input)
To set up the Optional functions, you must enter an administrator ID and
administrator password. For information on how to set the administrator
password, refer to Administrator (Administrator settings) on page 4-76.
1
Once you have entered the correct ID in the previous step (ID
(Administrator ID input)), the message display shows Password
(Administrator password input) and a blinking cursor (_).
2
Press or
blinking cursor. Enter the specified password. Use
the cursor right and left. Enter a password consisting of between 0 (no
settings) and 16 numbers.
Note If you enter the incorrect administrator ID or password,
the message Wrong ID or Wrong Password appears and
the input screen then reappears. Re-enter the ID or password
correctly.
3
Press [OK]. The Op functions screen appears.
A-10
repeatedly until Op functions
to increase or decrease, respectively, the value at the
to increase or decrease, respectively, the value at the
Appendix
> appears.
and to move the
and to move