Override A4/Lt (Overriding Difference Between A4 And Letter); Emulation (Setting The Emulation); Error Report (Printing Kpdl Errors) - Kyocera FS-C5150DN Operation Manual

>Override A4/LT
? Off
>Emulation
? PCL 6
Override A4/LT (Overriding difference between A4 and
Letter)
When the Override A4/LT is turned On using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes. Printing
is performed without an error message even if the actual paper size in the
current cassette differs from the paper size formatting the job.
By default, this feature is Off.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Override A4/LT appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.

Emulation (Setting the emulation)

You can change the emulation mode for the current interface. Use the
procedure below to select the mode.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Emulation > appears on the
message display. One of the emulation modes appears, indicating
the emulation currently in use.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or repeatedly until the desired emulation mode is
displayed.
PCL 6
KPDL
KPDL (AUTO)
Note The default setting for North America is KPDL (AUTO)
emulation. The default setting for all other regions is PCL 6
emulation.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.

Error Report (Printing KPDL errors)

The printer can print error descriptions when printing error occurs during
KPDL emulation. The default is On — the printer does not print KPDL
errors.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Emulation > appears.
4-40
Using the Operation Panel
or .