Color Max. Output (Maximum Print Output Setting [Color]); Reset Counter (Counter Reset); Add Account (Department Registration) - Kyocera FS-C5150DN Operation Manual

>>Color Max. Output
0000001
>>Reset Counter?
>Add Account
_
3
Press or to increase or decrease, respectively, the value at the
blinking cursor. Set the desired number of pages. You can set a
number between 0000001 and 9999999 as the number of pages.
Use and to move the cursor right and left.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.

Color Max. Output (Maximum print output setting [color])

Limits the number of pages for color printing on the currently selected
account.
1
Set the account ID and then press
Max. Output appears.
2
Press [OK]. The message display shows a blinking cursor (_).
3
Press or to increase or decrease, respectively, the value at the
blinking cursor. Set the desired number of pages. You can set a
number between 0000001 and 9999999 as the number of pages.
Use and to move the cursor right and left.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.

Reset Counter (Counter reset)

Resets the counter (pages used) for the currently selected account.
1
Set the account ID and then press
Counter appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Press [OK] again. The counter is reset.
4
Press [MENU]. The display returns to Ready.

Add Account (Department registration)

This allows you to add a new account for which printing is permitted.
IMPORTANT Because account IDs are managed as numeric strings,
" 1 " and " 001 " are handled as different accounts. Also, once Job Ac-
counting is enabled, no jobs are printed unless information is attached
showing the accounts from which the jobs are being printed.
1
Press while Job Accounting > is displayed.
2
Press or repeatedly until >Add Account appears.
3
Press [OK]. The message display shows a blinking cursor (_).
4-74
Using the Operation Panel
or repeatedly until >>Color
or repeatedly until >>Reset