Printer Driver Settings; Options Installed; General - Konica Minolta bizhub C35 Reference Manual

Printer Driver Settings

Options Installed

Parameters
[Paper Source Unit]
[Hard Disk]

General

Parameters
[Nearest Size and Scale]
[Resolution]
[Paper Type]
[Paper Source]
[Manually Print on 2nd
side]
2-12
Settings
Select [Unit 3 + Unit 4], [Unit 4] if an optional
lower feeder unit for the printer has been
installed.
The default setting is [Disabled].
Select [None], or [Installed] for the storage
unit that is installed.
The default setting is [Installed].
Settings
If no paper tray contains paper of the speci-
fied size, the page is automatically enlarged
or reduced and paper of the most appropriate
size is selected.
The default setting is [Off].
Displays the image resolution (High Quality)
for printing.
Specifies the paper type as [Printer Default],
[Plain Paper], [Recycled], [Glossy], [Glossy
2], [Label], [Thick 1 (91 - 150g/m2)], [Thick 2
(151 - 210g/m2)], [Letterhead], [Envelope],
[Postcard], [Single Side Only (60 - 90g/m2)],
or [Special Paper (60 - 90g/m2)].
The default setting is [Printer Default].
Specifies the paper source as [Tray 1], [Tray
2], [Tray 3], [Tray 4], [Tray 1 (Manual Feed)],
or [Auto].
The default setting is [Auto].
Select whether or not to print on the back
side of paper that has already been printed
on.
The default setting is [Off].
Specifying Printer Driver Settings