Konica Minolta bizhub C35 Reference Manual page 357

Item
[Access Refuse Address]
8-90
Description
To specify addresses being denied
access, select [Enable].
Choices: [Enable], [Disable]
Default: [Disable]
Range of IP Specify the starting and ending
address addresses of ranges being denied
refused access access.
Format: *.*.*.* (The asterisks (*) indicate
numbers between 0 and 255.)
Default: [0.0.0.0]
To specify a single IP address, type
the same IP address into both the
box for the starting IP address and
for the ending IP address, or type
"0.0.0.0" into the box for either the
starting IP address or the ending IP
address.
If the starting IP address is larger
than the ending IP address, the
setting is not applied.
Configuring the Printer