For Netware 5.X/6 Novell Distributed Print Service (Ndps) - Konica Minolta bizhub C35 Reference Manual

–
–
–
–
–
–
–
–
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 5.x/6 Novell Distributed Print Service
(NDPS)
Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you will
create the printer agent, and then click [NDPS Printer] on the [Create]
submenu.
4
In the [NDPS Printer Name] box, enter the printer name.
5
In the [Printer Agent Source] column, select [Create a New Printer Agent],
and then click the [Create] button.
6
Check the printer agent name, and then in the [NDPS Manager Name]
box, browse through the NDPS manager names, and register one.
3-8
[Ethernet Frame Type]:
Select [Auto]. (Select the frame type according to the network
environment.)
[NetWare Print Mode]: Select [PServer].
[Print Server Name]: Specify the print server name created in step
4.
[Print Server Password]: Specify only when setting from the
NetWare server.
[Print Queue Scan Rate]: Specify 1. (Change as necessary.)
[Bindery/NDS]: Select [NDS].
[Preferred NDS Context Name]:
Specify the name of the context that connects to Pserver.
[Preferred NDS Tree Name]:
Specify the name of the tree that Pserver logs on to.
Printing With NetWare