Konica Minolta bizhub C35 Reference Manual page 307

Item
8-40
Description
[Output Tray Specifies whether or not a notification is
Full] sent when the output tray has become
full.
Choices: [Enable], [Disable]
Default: [Enable]
[Fuser Unit Specifies whether or not a notification is
End] sent when the fuser unit has reached the
end of its service life.
Choices: [Enable], [Disable]
Default: [Enable]
[Operator Call] Specifies whether or not a notification is
sent when the operator must be called.
Choices: [Enable], [Disable]
Default: [Enable]
[Service Call] Selects whether or not notification is sent
to the service representative when a con-
dition occurs that requires servicing.
Choices: [Enable], [Disable]
Default: [Enable]
[Job Complete] Specifies whether or not a notification is
sent when a print job is completed cor-
rectly.
Choices: [Enable], [Disable]
Default: [Enable]
[Job Error] Specifies whether or not a notification is
sent when a job could not be printed
because an error occurred.
Choices: [Enable], [Disable]
Default: [Enable]
Configuring the Printer