Specifying Settings For Using The Box Functions; Creating Boxes; Registering And Specifying Settings For Destinations; Specifying Network Settings - Konica Minolta bizhub 350 Operation Manual

Overview of the Box functions
2.3

Specifying settings for using the Box functions

Before using the Box functions, the following settings should be specified.

Creating boxes

In order to save scan documents in user boxes, the user box for saving the
document must be created.
User boxes can be set up by using PageScope Web Connection from a Web
browser on a computer on the network. For details, refer to "Using Page-
Scope Web Connection" on page 4-22.

Registering and specifying settings for destinations

Register the boxes where scan documents are to be saved with a one-touch
key as an HDD destination.
Boxes can be set up by using the machine's touch panel or by using Page-
Scope Web Connection from a Web browser on a computer on the network.
!
Detail
For details on registering and specifying settings for destinations, refer to
the sections listed below.
"Registering one-touch recipients from the control panel" on page 4-5
"Registering one-touch recipients" on page 4-29

Specifying network settings

Various settings must be specified in order to perform the Scan to HDD op-
eration. For details on the various settings and the procedures for specifying
the settings, refer to the User's Guide "Network Scanner Operations".
200/250/350
2
2-5