Flick; Drag; Precautions On Using The Touch Panel - Konica Minolta bizhub C224 Quick Start Manual

2

Flick

Make a slight fillip while sliding your finger on the screen. This action
is used to scroll an address or job list and feed thumbnail-view pag-
es.

Drag

Slide your finger on the screen while touching it. This action is used
to move a display position on an application or preview screen.

Precautions on using the Touch panel

This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.
- Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
- Applying a strong force to the Touch Panel will damage the Touch Panel, and potentially cause a
breakage.
- When operating in the Touch Panel, do not press on it using excessive force or with a pointed object
such as a mechanical pencil.
- The Touch Panel may not respond appropriately, if operated with a wet finger or two fingers.
- The Touch Panel will not respond appropriately, if operated with hands with gloves on. It is recom-
mended that you use the Stylus Pen supplied with this machine or your finger.
- The Touch Panel may not respond appropriately, if the distance between you and a fluorescent lamp
is 20 inches (50 cm) or less while you are operating the Touch Panel.
- Avoid using the Touch Panel at a site near a device that generates electric noise (such as a generator
and an air conditioner). The electric noise may cause the Touch Panel to operate erratically.
2-30
Touch Panel
bizhub C554/C454/C364/C284/C224
2.5