Konica Minolta bizhub C224 Quick Start Manual page 33

2
No. Name
1 Main unit
2
Original Cover OC-511
3 Reverse Automatic Doc-
ument Feeder DF-624
4
Dual Scan Document
Feeder DF-701
5 Fax Kit FK-511
6
Authentication Unit AU-
102 (Biometric Type)
7 Authentication Unit AU-
201 (IC Card Type)
8
Working Table WT-506
9 Security Kit SC-508
10
Keyboard Holder KH-102
11 Mount Kit MK-730
12
Image Controller IC-414
13 Desk DK-705
14
Desk DK-510
15
Paper Feed Cabinet PC-
410
16 Paper Feed Cabinet PC-
210
17
Paper Feed Cabinet PC-
110
18 Finisher FS-534
19
Saddle Stitcher SD-511
20 Punch Kit PK-520
21
Finisher FS-533
22 Punch Kit PK-519
23
Job Separator JS-506
2-8
Description
Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
Used to fix the loaded originals.
Automatically feeds and scans originals by page.
Scans the front and back sides of the sheet at the same time. This
enables higher-speed scanning.
Required to use the fax function.
The Working Table WT-506 is required as a stand.
The Working Table WT-506 is required as a stand.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
Supports functions such as Copy Guard to prevent unauthorized
copying.
Install this holder to use an external keyboard.
Used to print on banner paper.
External image controller. Installing this unit provides the higher-
quality printing result.
Used to place this machine on the floor.
Used to place this machine on the floor.
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
Can load up to 500 sheets respectively into the top and bottom
trays.
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
Sorts, groups, or staples output sheets as required. The Desk DK-
510 or Paper Feed Cabinet is required to install this unit.
Used to add the bind/fold function to the Finisher FS-534.
Used to add the punch function to the Finisher FS-534.
Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
Used to add the punch function to the Finisher FS-533.
Used to separate output sheets into two trays in the body of the ma-
chine.
About this machine
bizhub C554/C454/C364/C284/C224
2.2