Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR 4308CI - AV Network Receiver Owner's Manual

Connecting the Monitor

• Connect the cables to be used (vpage 8 "Video Conversion Function").
• With HDMI connections, the video and audio signals can be transferred with a single cable.
• To output the audio signals to the monitor with HDMI connections, set GUI menu "Manual Setup"
– "HDMI Setup" – "Audio" to "TV" (vpage 30).
Monitor
NOTE
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor's operating instructions.
• The audio signals output from the HDMI connectors are only the HDMI input signals.

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.

DVD Player

• Connect the cables to be used.
• With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
• Connect an HDP (High-Definition Player) in the same way.
• When using an optical cable for the digital audio connection, make the settings at GUI menu "Source
Select" – "DVD" – "Assign" – "Digital" (vpage 42).
L R
R
L