Connecting A Dvd Player And Monitor; Connecting The Power Supply Cord - Denon AVR-1306 Operating Instructions Manual

Easy Operation
Connecting a DVD player and monitor TV
• To connect the digital audio output from the DVD player, you can choose from either the coaxial
or optical connections. If you choose to use the coaxial connection, it needs to be assigned. For
more information about Digital Input Assignment (
• Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition
disc player) to the DVD/VDP terminals in the same way.
Audio signal flow is shown with white arrows; video signal flow is shown with gray arrows.
page 15).
DVD player
F
VIDEO
OUT
D
OPTICAL
OUT
A AUDIO OUT
L
L L
R R
R
Monitor TV
F
VIDEO
IN
ENGLISH

Connecting the power supply cord

NOTE:
• Only use the AC OUTLET for connecting audio equipment. Never use it for hair driers, TVs or
other electrical appliances.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug from the wall socket
outlet.
When setting up this product, make sure that the AC outlet you are using is easily acceptable.
6
ENGLISH
Easy Operation
AC outlet (Wall)
AC 230 V, 50 Hz
AC OUTLET
• SWITCHED (total capacity – 100 W (0.43 A))
The power to this outlet is turned on and off
in conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit's power is at standby. Never connect
equipment whose total power consumption
exceeds 100 W (0.43 A).