Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR-1509 Owner's Manual

ENGLISH

Connecting the Monitor

Select the terminal to use and connect the device.
Monitor
GFlow of video signals inside the AVR-1509H
High picture
quality playback
HDMI connector
Component video
connectors
S-Video connector
Video connector
Video input terminals
0
NOTE
• The AVR-1509 supports four video input
formats: HDMI, component video, S-video and
video.
Because video signals are output from the
AVR-1509's monitor output terminal in the
same format as the video input signals, the
monitor output terminal should be of the
same type as the terminal used for input.
• The component video connectors may
be indicated differently on your monitor.
For details, see the monitor's operating
instructions.
• To play the sound by AVR-1509, make analog
or digital audio output connections to AVR-
1509's audio input connectors.
HDMI connector
Monitor
Component video
connectors
S-Video connector
Video connector
Monitor output
terminals

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.

DVD Player

Select the terminal to use and connect the device.
DVD player
L R
L R
• The same method can be used to connect an HDP (High-Definition Player) such as a Blu-ray Disc
player.
• When using an optical cable for the digital audio connection, make the settings at "System Setup"
– "Input Setup" – "Digital In Assign" (vpage 21).
NOTE
Because video signals are output from the AVR-1509's monitor output terminal in the same format as the
video input signals, the monitor output terminal should be of the same type as the terminal used for
input.
NOTE
The audio signal input to
the HDMI input connector
cannot be played on the
AVR-1509. Input the audio
signal to the digital audio
input connector or analog
audio input connector.