Basic Operation - Denon AVR 4308CI - AV Network Receiver Owner's Manual

<SOURCE SELECT>
ENTER
uiop
[ NET/DTU]
(DEVICE1 mode)
uiop
[SEARCH]
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Basic Operation

1
Make the necessary preparations.
q Check the network environment, then turn on the AVR-4308CI's
power. (vpage 20 "Network Audio")
w If settings are required, make the network settings.
(vpage 32 ~ 35 "Network Setup")
e Prepare the computer. (vComputer's operating instructions)
Install "Windows Media Player ver. 11" .
2
<SOURCE SELECT>
Either turn
(AMP mode) to select "NET/USB".
: "Source Select" –"NET/USB" –"Play"
(vpage 40)
3
To operate using the main remote control unit, set
the remote control unit to the NET/DTU (DEVICE 1)
mode.
(vpage 64 "Remote Control Unit Operations")
4
Use ui to select the menu, then press
to select the file you want to play.
5
ENTER
Press or
Playback starts.
ENTER
[NET/USB]
(AMP mode)
[NET/USB]
or press
ENTER
or p
p.
Stopping playback temporarily
During playback, press ENTER.
Press again to resume playback.
To stop
During the play or pause mode, press and hold ENTER.
Searching up or down pages
Press [SEARCH], then press o (down) or p(up).
To cancel, press ui or [SEARCH].
Searching by first letter
(Character search)
This operation is convenient for choosing items from the menu screens
for Internet radio stations or files stored on the computer.
q When the menu screen is displayed, press [SEARCH] twice.
w Use o p to select the first letter you want to search for.
If there are multiple items starting with the selected letter, they are
displayed in alphabetical order.
If it is not possible to search the list, "unsorted list. " is displayed.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound.
The default setting is "Mode3" .
• The time for which the GUI menus are displayed can be set at GUI
menu "Manual Setup" – "Option Setup" – "GUI" – "NET/USB"
(vpage 37).
• The display can be switched between the artist name, track name,
album name.
• The track display order differs with the server specification. When,
due to the server specification, track display is not in alphabetical
order, character search may not operate correctly.