Setting The Date And Time - Canon MX870 Series User Manual

>
Contents Preparing for Faxing

Setting the Date and Time

Note
When the machine is connected to a computer with the MP Drivers installed, the date and time
setting will be copied from the computer to the machine. As long as the date and time are set
accurately on your computer, you do not need to set them on the machine.
If you disconnect the power plug or when there is a power failure, the date and time setting on the
machine will be reset. When you connect the machine to a computer with the MP Drivers installed,
the setting may be copied to the machine once again.
1.
Display the Date/time setting screen.
Press the Setup button.
(1)
Select Device settings
(2)
Select Device user settings, and press the
(3)
Select Date/time setting, and press the OK button.
(4)
2.
Enter the date and time.
Use the Numeric buttons to enter the date and time (in 24-hour format).
(1)
Enter only the last two digits of the year.
Note
You can also use the
If you misentered the date and time, use the
wrong number, and reenter the correct number.
button.
Press the
(2) OK
Note
The date display format can be selected from three formats: YYYY/MM/DD, MM/DD/YYYY,
or DD/MM/YYYY (Date display format).
3. Press the FAX button to return to the fax standby screen.
> Specifying the Basic Settings for Faxing
, and press the
or
button (
Scroll Wheel
or
Advanced Guide
> Setting the Date and Time
button.
OK
button.
OK
) to enter the number.
button to move the cursor under the
Troubleshooting
Page top