Setting Date And Time - Canon MB2100 Series Online Manual

Setting Date and Time

This section describes the procedure to set the date and time.
1. Make sure that printer is turned on.
2. Select Setup on HOME screen.
Using the Operation Panel
3. Select Device settings, and then press OK button.
4. Select Device user settings, and then press OK button.
5. Select Date/time setting, and then press OK button.
6. Set date and time.
Use the button to move the cursor under the desired position, and then use the
enter the date and time.
Enter the date and time in 24-hour format.
Enter only the last two digits of the year.
7. Press OK button.
8. Press HOME button to return to HOME screen.
Setting Daylight Saving Time (Summer Time)
Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.
You can set your printer to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and ends.
726
button to