Epson SureColor T3000 User Manual page 88

Hard Disk Unit Functions
When an optional hard disk unit is installed, print jobs can be viewed and managed as
described below.
Viewing Print Jobs
O
When there are multiple print jobs with some in the queue, the following information can
be displayed.
Print start time
O
Estimated print time
O
Other information, including whether the job can be printed without replacing
O
consumables
Print jobs can be selected and cancelled in Remote Manager or the LFP HDD Utility.
Viewing and Resuming Held Print Jobs
O
If the source selected with the printer differs from the source specified in the print job,
an error will occur and printing will be suspended.
When an error occurs, printing cannot be restarted until the printer has been readied by,
for example, replacing the paper.
When an optional hard disk unit is installed, the following types of print job can be held
temporarily.
Print jobs that specify sources that differ from that selected with the printer
O
Print jobs that specify paper types that differ from that selected with the printer
O
Print jobs that specify output paper sizes (widths) that differ from that selected with
O
the printer
After printing all the jobs that can be printed with the current paper, you can replace the
paper with the media specified in the held print jobs and resume printing, making your
work more efficient.
Individual jobs can be selected and resumed or cancelled in Remote Manager or the
LFP HDD Utility.
Note:
Held print jobs can be saved if On is selected for Store Held Job in the control panel
Setup menu. The factory default setting is Off.
See "Setup menu" on page 175.
Using the Optional Hard Disk Unit 88