Removing The Roll Paper - Epson SureColor T3000 User Manual

2. Press the OK button.
The paper is cut by the built-in cutter.

Removing the roll paper

This section describes how to remove and store roll paper after printing. The pressure
rollers may leave impressions on paper that is left in the printer.
Buttons that are used in the following settings:
1. Confirm that the printer is ready and press the ( button.
The Load/Remove Paper menu will be displayed.
2. Press the d/u buttons to highlight Remove Paper and press the OK button.
If On is selected for Roll Paper Remaining, the printer will automatically print a
barcode.
3. The paper will automatically be rewound.
Once the paper is rewound, the printer will display Press
Note:
When the display shows Turn roll paper adapter to wind up roll paper, open the
roll paper cover and rewind the paper by hand.
and load paper.
Basic Operations 41