Printer driver
Cutting operation
settings
Double Cut
Setting Procedures for Printing
Windows
1. Display the printer driver's Printer Settings tab and adjust the following settings.
See "Basic Printing Methods (Windows)" on page 71.
2. Select Borderless in the Size Settings area.
Explanation
O The top area may become slightly uneven
depending on the image since the print
operation stops while cutting the top edge of
the roll paper.
O The printed paper is approximately 2 mm
shorter than the specified size since the
printer cuts the paper inside the image to
avoid showing top and bottom margins.
O After cutting the bottom edge of the previous
page, the printer feeds the paper, and then
cuts the top edge of the following page.
Although this produces 2.4 to 5 inches (60 to
127 mm) cut-off pieces, the cut is more
accurate.
More Ways to Print
109