Epson SureColor T3000 User Manual page 178

Item
Printer Setup Advanced
(Cont'd) Settings
(Cont'd)
Restore Settings
Description
Paper Size On (Default)
Check
Off
Paper On (Default)
Skew
Off
Check
Store Held On
Job
Off (Default)
Yes
No
Choose whether the printer
automatically detects (On) or
does not detect (Off) the paper
width. Try choosing Off if a paper
setting error is displayed when
the paper is correctly loaded.
Note, however, that the printer
may print outside the paper
when Off is selected. If it prints
beyond the edges of the paper,
the inside of the printer becomes
dirty with ink. We generally
recommend to operate with this
setting set to On.
If On is selected, an error will be
displayed in the control panel
and printing will stop if the paper
is skewed; select Off to disable
this feature. On is recommended
in most circumstances as
skewed paper may cause the
printer to jam.
This item is available when an
optional hard disk unit is installed.
If On is selected, print jobs that
require a paper type, source, or
output paper size (width) that
differs from those currently
selected with the printer will be
saved as held jobs; select Off to
disable this feature.
If Off is selected, an error will be
displayed and printing will stop if
the source selected for the print
job does not match that
selected with the printer.
If On is selected, printing will not
stop if an error occurs; instead,
jobs with non-matching settings
will be saved to the hard disk unit
as held jobs. Held jobs can be
printed from the Print Queues
menu after the printer has been
readied by, for example, loading
the correct type of paper.
See "The Purpose of the Hard
Disk Unit" on page 87.
Select Yes to restore all printer
settings to default values.
Using the Control Panel Menu 178