Epson SureColor T3000 User Manual page 176

Item
Printer Setup Roll Paper
(Cont'd) Setup
(Cont'd)
Description
Page Line On (Default)
Off
Roll Paper Normal (Default)
Margin
Top 15 mm/Bottom
15 mm
Top 35 mm/ Bottom
15 mm
Top 45 mm/Bottom
15 mm
3 mm
15 mm
Roll Paper On (Default)
Remaining
Off
If Auto Cut is Off, you can choose
to print (On) or not print (Off) cut
lines on roll paper. Cut lines are
not printed if Auto Cut is On or
when cut sheets or poster board
is used.
Note, however, that if the roll
width selected with the
computer is narrower than the
paper loaded in the printer, cut
lines will be printed regardless of
the option selected for Auto Cut.
The setting selected with the
printer driver takes priority when
the printer driver is used.
When set to Normal, the top and
bottom margins are 15 mm, and
the left and right margins are 3
mm.
Except for 15 mm, the left and
right margins for all other settings
are 3 mm.
See "Printable Area" on page
81.
Select whether to display/record
(On) or not to display/record
(Off) the amount of remaining
roll paper. The following options
can be made available by
selecting On and entering the
length of the roll.
Amount of roll paper remaining
When the roll is removed, a
barcode will automatically be
printed on the roll stating the
length remaining, the value
selected for the roll remaining
alert, and the paper type.
The barcode is automatically
read and settings adjusted the
next time the paper is used,
improving efficiency when
multiple rolls of paper are used.
Printing Availability
The printer will estimate printing
availability based on the length
of the roll.
Using the Control Panel Menu 176