Using the Control Panel
This section describes how to use the control panel for the auto take-up reel unit.
1
Power lamp
Displays the status of the auto take-up reel unit.
On
Flickering
Blinking
Intermittent blinking
Off
2
Auto switch
Selects the auto take-up direction.
Backward
Forward
Off
3
Manual switch
Selects the manual take-up direction.
The setting selected with the Manual switch takes effect when the Auto switch is in the Off
position.
Backward
Forward
:
The auto take-up reel unit is ready for use.
:
The auto take-up reel unit is in use.
:
The auto take-up reel unit is in power-saving mode.
:
An error has occurred.
:
The power is off.
:
The roll is taken up with the printable side in.
:
The roll is taken up with the printable side out.
:
The auto take-up reel unit does not take up paper.
:
The roll is taken up with the printable side in.
The speed will increase after the button is pressed for
more than three seconds.
:
The roll is taken up with the printable side out.
The speed will increase after the button is pressed for
more than three seconds.
Basic Operations
62