When A Maintenance Call/Service Call Occurs - Epson SureColor T3000 User Manual

When a Maintenance Call/Service Call Occurs

Error messages
Maintenance Request
Replace Part Soon/Replace Part
Now
XXXXXXXX
Call For Service
XXXX Error XXXX
Power off and then on. If this
doesn't work, note the code
and call for service.
Call-for-Service Codes
The characters indicated by asterisks (*) vary with the type of error.
Carriage error
Paper feed error
Circuit error
Ink system error
Replacement part required
Mechanical error
What to do
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the
maintenance request code.
You cannot clear the maintenance request until the part is
replaced. A service call occurs if you continue to use the
printer.
A call for service occurs when:
O The power cable is not connected securely
O An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically
stops printing. Turn off the printer, disconnect the power cable
from the outlet and from the AC inlet on the printer, and then
reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel,
contact your dealer or Epson Support for assistance. Tell them
the call for service code is "XXXX".
11**
12**
00**, 13**, 1A**, 1F**, 20**, 3000, Dx**,
Fx**
14**, 162*, 1900
110*, 143*
15**
Problem Solver 207