Error Messages - Epson WorkForce Pro WP-4515 User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
Menu
Maintenance
Problem Solver

Error Messages

This section describes the meaning of messages displayed on the LCD screen.
Error Messages
Paper out or Paper jam
No paper source matches paper size setting. Load XXX
paper in YYY. Press x or x.
No paper source matches paper size setting. Load
appropriate paper in YYY. Press x or x.
A printer error has occurred. Turn power off and then on
again. For details, see your documentation.
Printer error. Turn power off and then on again. For details,
see your documentation.
Communication error. Connect computer.
Communication error. Make sure the computer is
connected, then try again.
Maintenance box is nearing end of its service life.
Maintenance Box is at the end of its service life. You need to
replace it.
Cannot recognize USB device.
Cannot recognize the device.
Cannot recognize the device. Make sure the connected
device is capable of storage.
Using the Control Panel
Setting item
Nozzle Check
Head Cleaning
Head Alignment
User's Guide
Description
Solutions
& See "The Paper Jams" on page 164
& See "Loading Paper" on page 27
Turn the printer off and then back on. Make sure that no paper is
still in the printer. If the error message still appears, contact Epson
support.
Make sure the computer is connected correctly. If the error
messages still appears, make sure that scanning software is
installed on your computer and that the software settings are
correct.
Replace maintenance box before the end of its service life.
& See "Replacing a maintenance box" on page 142
When the maintenance box is full, the printer stops and you need
to replace the maintenance box to continue printing.
Replace maintenance box.
& See "Replacing a maintenance box" on page 142
Make sure USB device has been inserted correctly.
Make sure the storage disk has been inserted correctly.
131