Standards And Approvals - Epson WorkForce Pro WP-4515 User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
Humidity
* Without condensation

Standards and approvals

WP-4530/WP-4531/WP-4535/WP-4540/WP-4545
U.S. model:
Safety
EMC
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for
any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
European model:
Low voltage directive 2006/95/EC
EMC directive 2004/108/EC
R&TTE directive 1999/5/EC
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Models, C451C and C451D, are in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg,
Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria,
Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, and Malta.
Product Information
Operation:*
20 to 80% RH
Storage:*
5 to 85% RH
UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
EN60950-1
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
EN300 328
EN301 489-1
EN301 489-17
TBR21
EN60950-1
User's Guide
203