WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
❏ Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction.
"Loading Paper" on page 27
&
❏ When you select Standard Quality or Best as the Quality setting, select Off as the Bidirectional setting.
Bidirectional printing decreases print quality.
❏ Perform a nozzle check first and then clean the print head that shows a defect in the nozzle check result.
"Checking the Print Head Nozzles" on page 144
&
❏ For best results, use up ink cartridge within six months of opening the package.
"Replacing an ink cartridge" on page 140
&
Your print is grainy
❏ Align the print head. If a quality is not improved, try aligning using the printer driver utility.
"Aligning the Print Head" on page 148
&
You see incorrect or missing colors
❏ Perform a nozzle check first and then clean the print head that shows a defect in the nozzle check result.
"Checking the Print Head Nozzles" on page 144
&
❏ For best results, use up ink cartridge within six months of opening the package.
"Replacing an ink cartridge" on page 140
&
The image size or position is incorrect
❏ Make sure you selected the correct Paper Size, Layout, Expansion, and Reduce/Enlarge setting for the loaded
paper.
"Copy mode menu list" on page 126
&
❏ Make sure you loaded paper and placed the original correctly.
"Loading Paper" on page 27
&
❏ If the edges of the copy or photo are cropped off, move the original slightly away from the corner.
❏ Clean the document glass.
"Cleaning the exterior of the printer" on page 153
&
Troubleshooting for Copying
and
"Cleaning the Print Head" on page 145
and
"Cleaning the Print Head" on page 145
and
"Placing Originals" on page 35
189
User's Guide