Checking Printer Status; For Windows - Epson WorkForce Pro WP-4515 User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
C
Press the P button to turn on the printer.
D
Press F Setup.
E
Select Maintenance.
F
Select Nozzle Check.
G
Press one of the x Start buttons to start the ink nozzle check.
A test page prints showing a nozzle check pattern. If the pattern has gaps, you need to clean the print head.
"Cleaning the Print Head" on page 145
&
❏ If the test page prints, the problem probably lies in your software settings, the cable, or your computer. It is also
possible that your software may not be installed correctly. Try uninstalling your software and reinstalling it.
"Uninstalling Your Software" on page 156
&
❏ If the test page does not print, you may have a problem with your printer. Try the suggestions in the following
section.
"The Printer Does Not Print" on page 178
&

Checking Printer Status

For Windows

Using EPSON Status Monitor 3
EPSON Status Monitor 3 displays detailed information on the printer status.
There are two ways to access EPSON Status Monitor 3:
❏ Double-click the printer shortcut icon on your Windows taskbar. To add a shortcut icon to the taskbar, see the
following section:
"From the shortcut icon on the taskbar" on page 40
&
❏ Open the printer driver, click the Maintenance tab, then click the EPSON Status Monitor 3 button.
Troubleshooting for Printing
160
User's Guide