Removing The Sd Card Reader Support Bracket - Dell PowerEdge C8000 Hardware Owner's Manual

5 Replace the mezzanine card. See "Installing the SAS Mezzanine Card" on
page 229, "Installing the Infiniband Mezzanine Card" on page 232, or
"Installing the 10 GbE Mezzanine Card" on page 236.
6 Close the sled. See "Installing the Front and Back Sled Covers" on
page 165 or "Installing the Sled Cover" on page 168.
7 Replace the sled. See "Installing a Sled" on page 142.

Removing the SD Card Reader Support Bracket

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Remove the mezzanine card. See "Removing the SAS Mezzanine Card" on
page 223, "Removing the 10 GbE Mezzanine Card" on page 233, or
"Removing the Infiniband Mezzanine Card" on page 229.
4 Remove the SD card reader. See "Removing the SD Card Reader" on
page 237.
5 Remove the two screws securing the SD card reader support bracket. See
Figure 3-76.
6 Lift the support bracket out of the sled tray. See Figure 3-76.
240
Installing System Components
Many repairs may only be done by a certified service technician. You