Removing The 10 Gbe Mezzanine Card - Dell PowerEdge C8000 Hardware Owner's Manual

5 Lower the Infiniband mezzanine card assembly to the sled tray. See
Figure 3-68.
6 Replace the two screws securing the Infiniband mezzanine card assembly
to the sled tray. See Figure 3-68.
7 Close the sled. See "Installing the Front and Back Sled Covers" on
page 165 or "Installing the Sled Cover" on page 168.
8 Replace the sled. See "Installing a Sled" on page 142.

Removing the 10 GbE Mezzanine Card

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Remove the two screws securing the 10 GbE mezzanine card assembly to
the sled tray. See Figure 3-71.
4 Lift the 10 GbE mezzanine card assembly out of the sled tray. See
Figure 3-71.
Installing System Components
233