Removing The Hard-Drive Tray - Dell PowerEdge C8000 Hardware Owner's Manual

Removing the Hard-Drive Tray

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Remove the internal hard-drives. See "Removing a Hard-Drive Carrier
Located on the Sled Tray" on page 154.
4 Remove the three screws securing the hard-drive tray. See Figure 3-20.
5 Lift the hard-drive tray at an angle and slide the standoff holes on the
hard-drive tray out of the sled tray standoffs. See Figure 3-20.
Figure 3-20. Removing and Installing the Hard-Drive Tray
1 screws (3)
3 hard-drive tray standoff holes (2)
158
Installing System Components
Many repairs may only be done by a certified service technician. You
2 hard-drive tray